Showing posts with label blinds. Show all posts
Showing posts with label blinds. Show all posts

Sunday, November 7, 2010

Blinds - How to + One finished bedroom

It's time for a 2 part post... yeah I've been too busy to make a new post this week so now I have do double down on them. My apologies for some of the pictures turning out bad. I didn't realize there was a fingerprint on the camera lens until I was halfway through.

Part 1 is something that should help anyone out who inherits an otherwise good set of blinds that have a bad color of fabric (tape) they would like to change to something normal looking. From a cost standpoint it makes total sense because tape can be found for about $1/foot, if not less and it would easily run hundreds to replace the entire set of blinds. Materials came from Fix My Blinds. Anyway on to the how to.



First of course, you'll need to remove the blinds from the wall. You should be able to figure this part out on your own.



Next you'll need to remove the clip at the bottom of each piece of tape. Untie the knot in the string underneath the clip you just removed. Now you should pull the string up past the top slat in the blinds. Once you've done both of them you can now slide the slats to the left or right leaving the tape behind.

Remove one of the pieces of tape from the blind - you'll use this to measure your new one from. This part is VERY important so read carefully. In the picture below you'll see how there are pieces of fabric connecting one side of the tape to the other. These are what each slat from the blinds sit on. These need to all be the same from one piece to the next or else the slats won't be horizontal - they'll be crooked and look terrible.



What I did was measure from the fold at the top of the tape to the first piece of fabric and adjust my fold to make the distance the same from the old tape to the new. In the picture above one part of the new tape is folded and the other is not yet, and it's all lined up so the new pieces will match the old one as well as each other. It took me a while to figure this out and I'm saving you the trouble here. Lining things up like this will also help you to get the other end cut so the new tape won't be any longer or shorter than the old one as well.

Putting the blinds back together isn't hard, but before you get into that go ahead and give everything a good cleaning since it's easier now than it ever will be in the future. The new tape goes in like the old came out, and it's hard to go wrong here. Slide the slats in and thread the two pieces of string back through the holes in the slats. Tie it off at the very bottom, put the clips back on and you're done.





As a side note, if you've ever wanted to see what UV light does to fabric check this out. Once upon a time it was forest green just like the other side is. Tinted windows or solar shades in a hot climate like this are a good thing.



And on to the other part of this post - one finished bedroom. Where are the other two? Not quite there... I need to hang a mirror in one, and do some major cleaning in the main bedroom but they'll be up soon. The office is almost done; I just need to move the desk, hang a few diplomas and evict everything up here that belongs in the kitchen.

This is the room that used to be gold once upon a time ago.







For today I'm moving on to work on the outside. This is a house blog but the back yard needs attention and doing a transformation to the back yard won't take long and will make a real difference to this place. We're still on target for being 100% done with everything next Saturday if you can believe it.

Sunday, June 14, 2009

March 2009

Not a lot going on this month because I was back in Seattle pretty much the entire time. Most months are like that, but I think I was only in Texas for a few days in March.

But I did manage to get a few things done. Because this house is in Texas and the back of the house faces due south it can get a little warm in the main bedroom. The living room faces south and also has windows to the west, but they're sheltered by trees and the pergola and it doesn't get hot in there. The main bedroom though - last summer it would routinely get above 86 in there, which is a good 8 degrees or more than the thermostat is set to. It could be more, but my thermometer runs out of numbers around 86 or 88 and if it was hotter in there I don't want to know about it. So since it's March and it's already hot out I decided to do something about it.

Because replacing the windows would've been insanely difficult and expensive I decided to go with tinting instead. Beforehand the blinds were hitting 100-110 degrees when closed, so they were basically acting like giant radiators dumping heat into the room. Elle and I went to Lowes and got some tinting that blocks 70% of the energy from coming into the room and went about installing it. It's really a weekend project if you go slow and take lots of breaks. Pretty easy to do, but you absolutely have to have a helper. The tint will stick together and drive you crazy without someone holding it still. That will ruin the piece you are trying to install and you'll have to start over. But seriously, it's a very easy project to do yourself.

The results? The room is now the same temperature as the rest of the house! It dropped a good 5 or 6 degrees and is much more comfortable to be in. The blinds are now only slightly warmer than room temperature. When I had them off I could really tell what 10 years worth of sun has done to them. They're Everwood by Hunter Douglass so they aren't supposed to change color due to UV exposure, but you can tell they've been exposed to a harsh environment. The green (ick!) pleats were faded nearly white on the sunny side.

We also got replacement parts in for the blinds. At only 10 years old they were starting to look pretty sad. A part that holds the cloth sashes up is made entirely of plastic with two thin arms supporting the whole thing. Of course the arms break off and the blinds look run-down pretty fast. There's a solution to replacing them though - Fix My Blinds. They sell replacement parts for all makes and models, and they're stronger than what the originals and should last longer. We plan on ordering again later to get rid of the 1990s hunter green sashes on the blinds in the main bedroom, and fix a defect on the blinds in the laundry room.
 
Locations of visitors to this page